Jim Dabrowski

Follow @jimdab on Micro.blog.

Flying Dutchman: Step B

Step B is complete. 

Picture of the lower deck of the Flying Dutchman model ship all planked and varnished.

This is going to be the lower deck of the ship. Those five pieces are of plywood and I had to cut each one out, then cut a whole bunch of 65mm long strips of wood and glue them on. The lines between the planks and the dots are all made from pencil drawing along the sides or poking holes in the corners after they’ve been glued on. Then some sanding and finally a coat of clear, satin varnish. 

The next step, step C, I get to put those on the bulkheads and add some details. Stay tuned!